SEAM Welding Machine
SEAM Welding Machine SPOT WELDER MACHINE Johor Bahru (JB), Malaysia, Austin Perdana Supplier, Suppliers, Supply, Supplies | Exa Welding (M) Sdn Bhd
Main advantages of this procedure
  • Transformer – Fully epoxy moulded H Class Insulation, Excellent resistance to humidity, dust and vibration
  • Seam Welders – are general purpose machines for boad carity welder or as conversion from spot welders.
  • High Visibility Transparent hoses – Transparents hoses are used, this helps the operator to view cooling water flow
  • Bottom Exhaust – air is discarged at the lower part of the machine, thereby reducing oil mist. This helps in keeping working environment clean.
  • Upslope circuit facility – Upslope circuit is a standard feature to achieve excellent welding with practically no flash
  • Weld interlock facility – A weld interlock is a standard feature to facilitate intial power receiving.
Specification

Rated Capacity (KVA)
100

Maximum Short Circuit Power (KVA)
387

Maximum Welding Power (KVA)
387

Nominal Power @ 50% Duty Cycle (KVA)
100

Nominal Supply Voltage (V)
415

Supply Frequency (Hz)
50/60

Supply Phases
3

Supply Capacity (KVA)
173

HRC Fuse Size to BD88 (A)
160

Feed Cable C.S.A up to 30. Along (mm)
270

Maximum Short Circuit Primary Current (A)
600

Duty Cycle For Maximum Welding (%)
50

Continuous Secondary Current @ 100% Duty Cycle (A)
20,000

Welding Cylinder (mm)
160

Weld Force min/max With 1.5/5.5 bar Supply (KN)
3.0/11.0

Welding Cylinder Stroke Maximum (mm)
76

Air Pressure Normal (bar)
5.5

Air Pressure Maximum Operating (bar)
7

Air Connection / Hose Size (BSP/in)
½” / ½”

Cooling Water minimum operating presure (bar)
3

Cooling Water (L/min)
25

Cooling Water Maximum Inlet Temperature Operating Pressure (°C)
30

Cooling Water Connection / Hose size (BSP/in)
½” / ¾”

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version